Best Safe Box for Concrete: Grain, Bolts, Depth

The best safe box for concrete in this set is the SentrySafe 1160, a 16 lb chest safe with pre-set proportions and a UL-classified fire body that takes surface anchors cleanly into a slab. For a full-size cabinet install with a keypad, the Amazon Basics 50SAM steps up to 1.8 cu. ft. and 37.5 lb of steel with pre-drilled mounting holes for floor bolts. Below, seven picks ranked by how well the published dimensions and hardware match a concrete anchor job.

Best safe box for concrete at a glance

How I cut 30-plus listings down to seven

I sorted candidates by whether the listing spelled out the fixing method a concrete anchor actually needs: pre-drilled mounting holes, expansion bolts included, or an in-floor body designed to be set into the slab. Anything sold as a jewelry chest with no fixing hardware was cut. Anything marketed only as a wall-mount was cut. The seven that survived either come with expansion bolts, publish pre-drilled hole positions, or are floor safes built to be sunk.

The buyer profiles then split three ways. A slab-surface bolt job wants a small, dense box like the SentrySafe 1160 or the Amazon Basics 25EI: enough mass to matter, small enough to line up cleanly with a hammer drill. A stand-up cabinet safe going onto a concrete garage floor wants a taller body with floor bolt holes, so the Amazon Basics 50SAM, the VIDXCVIT and the Mitlvge 60ET made the list. A true in-slab install wants either the Stealth B2500E in-ground vault or the shallow Viking VS-15FL floor safe.

• Fixing hardware named in the listing
• Dimensions detailed enough to plan a drill pattern
• Weight low enough for a solo install, or a floor-sunk design
• A published warranty or a UL/ETL reference where the category allows

The keyword modifier says "concrete", and Amazon's results here are mixed. Some picks are explicitly floor-mount; others are cabinet safes with mounting holes that will take concrete anchors like any other. Read each pick's install notes before you buy.

1. SentrySafe 1160 — Best overall

A UL-classified fire chest at 16 lb, small enough to line up on a slab with one drill pattern.

Best for: surface-bolting a small fire safe to a garage or basement slab Skip it if: you need a keypad or more than 0.25 cu. ft. inside

The 1160 is the pick I would default to for a concrete surface anchor because the numbers stack up in a rare way for this set. It is 6.3 x 12.1 x 15.3 in on the outside and 16 lb on the scale, which is heavy enough to bite an expansion bolt and light enough that one person can position it. SentrySafe says the body is UL classified for 1/2 hour at 1550°F and ETL verified for the same interval on digital media, which is the only published fire endurance figure in this roundup. The interior is 3 in H x 13 in W x 8.75 in D, sized for documents and small valuables rather than a full box of files.

It sells faster than every other pick here, which tells you buyers are matching it to exactly this job. The trade-off is real: 0.25 cu. ft. is small, the lock is a key rather than a keypad, and the warranty is limited to one year. Against the Stealth or the Viking it is not an in-slab safe, only a surface-anchored one.

Pros:

• UL classified fire endurance figures published
• 16 lb, workable for a solo concrete install
• Carrying grips help with the drill-and-line-up step
• Sells faster than any other pick in this set
• Small footprint, low profile on a slab

Cons:

• Key lock only, no keypad option
• 0.25 cu. ft. is tight for larger documents
• Warranty limited to one year
• No mounting hardware itemised in the listing

2. Amazon Basics 50SAM — Best for pros

A 1.8 cu. ft. cabinet safe with 8-gauge door steel and pre-drilled floor mounting holes.

Best for: a full-size cabinet safe bolted flat to a concrete floor Skip it if: the install spot has less than about 20 in of vertical clearance

The 50SAM is the pick I would send someone to when a stand-up cabinet safe has to go on a garage slab or a basement concrete floor. Amazon Basics says the door is 8-gauge steel and the body is 14-gauge, with two live-door bolts and pry-resistant concealed hinges. The exterior is 19.7 x 13 x 13.8 in and it weighs 37.5 lb, which is a workable one-person carry to the install spot but heavy enough to stay put once bolted. It ships with pre-drilled mounting holes and hardware, which is the specification that actually matters here: you drop it in place, mark the holes and drill for concrete anchors.

The lock is a programmable electronic keypad with a backup key, powered by AA batteries. It is the second-cheapest of the seven and it is a mid-popularity seller for this set. The trade-off against the SentrySafe 1160 is that no fire endurance rating is published on this body, so treat it as a security safe rather than a fireproof one. Against the Stealth, it is a surface bolt-down rather than an in-slab install.

Pros:

• Pre-drilled mounting holes and hardware included
• 8-gauge door and 14-gauge body claimed
• Two live-door bolts and concealed hinges
• Second-cheapest pick here for a 1.8 cu. ft. body
• Keypad with backup key

Cons:

• No published fire endurance figures
• 37.5 lb still a two-hand carry up stairs
• Vertical footprint tall for low-clearance spots
• No warranty period listed

3. Amazon Basics 25EI — Best budget pick

A 0.5 cu. ft. keypad safe with four expansion bolts in the box.

Best for: a first concrete-anchored safe on a tight budget Skip it if: you want a published fire rating on the box itself

The 25EI is the cheapest safe in this set and the one to reach for if the job is a first concrete anchor and the goal is to learn the process before spending more. Amazon Basics says it ships with four expansion bolts and pre-drilled mounting holes for floor, wall or shelf mounting, which is the concrete-relevant hardware most listings quietly omit. The exterior is 13.8 x 9.8 x 9.8 in with an interior of 13.6 x 7.2 x 9.7 in, and door thickness is called out at approximately 2 in. It weighs 18.3 lb, close to the 1160 but with keypad convenience and an adjustable removable shelf.

The lock is electronic with three operation indicator lights and two emergency override keys, powered by four AA batteries. Sales rank puts it well ahead of most of the taller cabinet safes here. Trade-offs are honest: no fire rating, no warranty in the specifications, and a smaller door thickness than the Stealth's half-inch plate. Against the 50SAM it is smaller and lighter, which is exactly why it wins for a first solo install.

Pros:

• Four expansion bolts included in the box
• Cheapest of the seven picks
• Adjustable removable interior shelf
• Two emergency override keys
• Compact footprint for a corner install

Cons:

• No fire endurance figures published
• No warranty period listed
• Door thickness only around 2 in
• Batteries not included

4. VIDXCVIT 3.4 CUFT — Runner-up

A mid-size cabinet safe with 20 mm solid locking bolts and a keypad lockout on three wrong tries.

Best for: a mid-size cabinet safe with a keypad and backup key Skip it if: you need documented UL fire endurance figures

The VIDXCVIT sits between the Amazon Basics 50SAM and the Mitlvge on capacity, at 3.4 cu. ft. and 29.8 lb, in a body that measures 19.7 x 12.2 x 13.8 in. VIDXCVIT says the construction is SPCC steel with two 20 mm diameter solid bolts, and the keypad locks the safe for 20 minutes after three wrong entries. It ships with spare keys as a backup. Marketing text also mentions fireproof and waterproof properties, but no UL or ETL classification is stated the way SentrySafe states one, so I would treat those as manufacturer claims rather than verified figures.

Only one seller lists this safe, and its sales rank is well below the two Amazon Basics picks, which usually means slower turnover in this segment. That is worth knowing if you need a replacement part later. The trade-off against the 50SAM is a taller capacity for slightly less body weight, which matters when the fixing surface is concrete: heavier is generally better once the anchors are set.

Pros:

• 20 mm solid locking bolts claimed
• Keypad lockout after three wrong entries
• 3.4 cu. ft. in a manageable 29.8 lb body
• Backup keys included

Cons:

• Only one seller listed
• Fire and water claims not tied to a UL rating
• Lower body weight than the 50SAM for a bigger box
• No warranty period listed

5. Stealth B2500E — Best premium

A US-made in-ground vault with a 1/2 in solid steel plate door and three 1 in solid steel locking bolts.

Best for: a genuine in-slab pour where the safe body sits below floor level Skip it if: you cannot cut and re-pour concrete at the install site

The Stealth B2500E is the only pick here designed to be set into concrete rather than bolted onto it. Stealth says the door is a 1/2 in solid steel plate over a 12-gauge steel body, with three 1 in solid steel locking bolts, a bolt detent, and a UL-approved high-security electronic lock protected by hardplate and relocker. The listing gives external dimensions of 14.5 W x 12.5 L x 17.75 D in and states 110 lb, while the shipping spec on the same page lists 87 lb, so allow for that discrepancy when you plan the excavation. It is made in the USA and carries a 2 year parts and labor warranty, with 5 years on hinges and welds, the most detailed warranty in this set.

This is the most expensive pick here and the slowest seller of the seven. That is because in-slab safes are a specialist purchase, not a slow product. The trade-off is scope: if you cannot cut into a slab, this pick is not your safe, and you want the SentrySafe 1160 or the 50SAM instead.

Pros:

• 1/2 in solid steel plate door claimed
• Three 1 in solid steel locking bolts
• UL-approved electronic lock with hardplate and relocker
• 2 year parts and labor, 5 year hinges and welds warranty
• Made in USA

Cons:

• Requires cutting or pouring concrete to install
• Weight figures inconsistent between fields
• The most expensive pick here
• Only one seller listed

6. Mitlvge 60ET — Best for beginners

A 5.0 cu. ft. cabinet safe with three removable shelves and a fireproof document bag included.

Best for: a first tall cabinet safe with shelves and a document bag included Skip it if: your floor cavity is narrower than about 15 in

The Mitlvge 60ET is the biggest cabinet safe in the set, at 5.0 cu. ft. in a 23.6 x 12.2 x 15 in body that weighs 38.8 lb. Mitlvge says the door is 50 mm thick, with three 20 mm high-strength solid locking bolts and pry-proof concealed hinges. It ships with three removable steel shelves and an A4 fireproof document bag measuring 9.36 x 13.26 in, made of silicone-coated fibreglass. The lock is a digital keypad with a backup key.

For a beginner planning a concrete-floor anchor, this is the pick with the most guidance built in: shelves for organising, a document bag for the paperwork that would otherwise sit loose, and a body tall enough to stand against a wall. The trade-off is size. It is only marginally heavier than the 50SAM despite a much larger footprint, so the anchor pattern is doing more work per bolt. Fire and water resistance are marketing terms in the listing rather than UL figures. Against the SentrySafe, it is a very different tool: cabinet capacity over certified fire endurance.

Pros:

• 5.0 cu. ft. is the largest capacity here
• Three removable steel shelves included
• A4 fireproof document bag included
• 50 mm door thickness claimed
• Digital keypad with backup key

Cons:

• Fire resistance not tied to a UL rating
• Same body weight as the 50SAM despite a bigger box
• Tall footprint may not suit low ceilings
• No warranty period listed

7. Viking VS-15FL — Best for small spaces

A shallow mechanical floor safe with a 10 mm laser-cut door, supplied with expansion bolts for concrete or wood.

Best for: a shallow floor safe let into a wooden or concrete floor Skip it if: you need more than 5 in of interior depth

The Viking VS-15FL is the second in-floor pick and the shallow alternative to the Stealth. Viking says the door is laser-cut at 10 mm thickness and the safe is fixed under the floor with supplied expansion bolts sized for concrete or wooden floors. The lock is a high-security mechanical double-bit key with two keys included, and a hydraulic lift assists door opening. Body size is 5.1 H x 15.4 W x 8.4 D in and it weighs 23.6 lb, which puts it firmly in the shallow-cavity category rather than the vault category.

Interior is carpeted on all sides, with the lid covered in foam, which is a small detail that matters if you are storing watches or optics rather than paperwork. Against the Stealth, it is a lighter, shallower, mechanical-key alternative that is much easier to retrofit into a floor that already exists. The trade-offs are the same shape: no keypad, no fire rating, and a small interior depth. The category path on Amazon lists it under hand tools, which is the platform's mistake rather than the safe's, but worth noting when you search.

Pros:

• Supplied with expansion bolts for concrete or wooden floors
• 10 mm laser-cut door claimed
• Hydraulic lift for smooth door opening
• Fully carpeted interior with foam-covered lid
• Two double-bit keys included

Cons:

• Mechanical key only, no keypad
• Interior depth limited by the 5.1 in body
• No fire endurance figures published
• Only one seller listed

Does concrete mounting actually decide this?

Most guides in this space compare capacity first, and capacity is not what decides a concrete install. What decides it is whether the listing tells you how it fixes to the slab: hole pattern, hardware included, and body weight to keep it from walking under pry attack.

By that test, three picks lead: the Amazon Basics 25EI ships with four expansion bolts, the Viking VS-15FL ships with expansion bolts for concrete or wood, and the Stealth B2500E is built to be poured in. The SentrySafe 1160 lacks itemised bolt hardware but its weight and dimensions are the right shape for a slab surface anchor with off-the-shelf sleeve anchors from a hardware store.

Two questions to ask before you buy:

1. Is there an itemised bolt count in the listing, or only "pre-drilled mounting holes"?
2. Does the body weigh enough to matter once anchored, or is it a jewelry chest that happens to have holes?

If both answers land right, the safe is a concrete-ready safe. If they do not, you are buying a cabinet safe and sourcing anchors separately, which is fine for the 50SAM, the VIDXCVIT and the Mitlvge but is a hidden cost worth noting.

Anchor bolts, slab depth and what the listings hide

None of these listings tell you the diameter of the mounting holes, which is the single specification a concrete anchor needs. That is normal for the category, and it is why a masonry drill bit selection is a job for after the safe arrives, not before. Measure the hole, size the bolt, then drill.

• Sleeve anchors suit surface-bolted cabinet safes like the 50SAM and the Mitlvge
• Wedge anchors suit heavier surface installs where pry resistance matters most
• Drop-in anchors suit clean floor finishes where the head must sit flush
• In-slab pour applies only to the Stealth B2500E
• Retrofit floor cavity applies to the Viking VS-15FL

Slab depth is the other hidden variable. A garage slab is often 4 in thick and a basement slab can be as little as 3 in, and expansion anchors need enough embedment depth to grip without cracking out the back. That is a job for a tape measure and, if you are unsure, a rotary hammer with a depth stop. The best safe box for concrete is one that lets you set the anchor without hitting the underside of the slab.

The picks with a published warranty are the SentrySafe 1160 and the Stealth B2500E. The rest of the field is silent on warranty length, which is a genuine gap in the listings and one of the reasons the Stealth commands the price it does.

What more money buys across this set

The best safe box for concrete tracks price closely to two things: body weight and lock hardware. Going up the price positions in this set, the pattern is clear.

The cheapest picks are the Amazon Basics 25EI and 50SAM, both entry price band, and both trade specified fire endurance for a keypad and included expansion bolts. The mid-price picks are the VIDXCVIT and the Mitlvge, both around 3.4 to 5.0 cu. ft., both offering thicker door claims and shelves without a UL-verified fire figure. The premium picks are the Viking VS-15FL and the Stealth B2500E, and here you are paying for a floor-safe body designed to be built into a slab rather than bolted onto one.

The SentrySafe 1160 sits between bands with a listed warranty and a UL fire classification, which is why it takes the overall pick. It buys documented performance rather than raw capacity. That is a real decision, not a compromise: for many buyers, a chest fire safe anchored to a slab does more work than a cabinet safe on the same floor.

Which pick fits which install?

Here is the short answer, mapped to the install you actually have.

• Surface-anchoring a small safe to a garage or basement slab: SentrySafe 1160
• Standing a full-size cabinet safe on a concrete floor: Amazon Basics 50SAM
• First concrete anchor on a tight budget: Amazon Basics 25EI
• Mid-size cabinet with keypad and lockout timing: VIDXCVIT 3.4 CUFT
• Cutting and pouring an in-slab vault: Stealth B2500E
• Tall cabinet with shelves and a document bag: Mitlvge 60ET
• Retrofitting a shallow floor safe into an existing cavity: Viking VS-15FL

Two picks are genuine floor safes designed for slab work: the Stealth and the Viking. The other five are cabinet or chest safes that will accept concrete anchors. If you have not yet decided which install type you are doing, that is the first decision to make, and it is upstream of the pick.

The verdict

The best safe box for concrete in this set is the SentrySafe 1160. It is the only pick that pairs a UL-classified fire body with a weight and footprint that suits a solo surface-anchor job on a slab. At 16 lb and 6.3 x 12.1 x 15.3 in, it lines up with an off-the-shelf sleeve anchor without a two-person carry, and SentrySafe backs it with a limited one-year warranty. The runner-up is the Amazon Basics 50SAM, which becomes the right pick when the install is a stand-up cabinet safe on a garage floor and 1.8 cu. ft. beats a certified fire rating. Its 8-gauge door steel and pre-drilled mounting holes are the specifications that carry the decision.

If the install is an in-slab pour rather than a surface anchor, the picture flips: the Stealth B2500E is the only true in-ground safe here, with a 1/2 in solid steel plate door and a UL-approved electronic lock protected by hardplate and relocker. And if a shallow retrofit floor cavity is the reality, the Viking VS-15FL is the answer, sold with expansion bolts for concrete or wood. Match the pick to the install, not the install to the pick.

FAQ

Can any of these safes actually be bolted into concrete?

Yes, any of these safes can accept a concrete anchor, but they split into two groups. The Amazon Basics 25EI and 50SAM, the VIDXCVIT and the Mitlvge are surface-mount cabinet or chest safes with pre-drilled mounting holes, and the 25EI includes four expansion bolts. The Stealth B2500E and Viking VS-15FL are floor safes designed to be set into a slab or floor cavity, with the Viking supplied with expansion bolts.

Is the Stealth B2500E worth the premium over the Amazon Basics 50SAM?

Whether the Stealth B2500E is worth the premium depends on the install. The Stealth is an in-ground floor safe with a 1/2 in solid steel plate door, three 1 in solid steel locking bolts, and a UL-approved electronic lock, plus a 2 year parts and labor warranty. The 50SAM is a surface-anchored cabinet safe with 8-gauge door steel and a keypad. Different tools for different jobs.

What size anchor bolt fits the Amazon Basics 25EI?

The 25EI ships with four expansion bolts, so the size question is answered in the box. Amazon Basics lists pre-drilled mounting holes with those four bolts included for floor, wall or shelf mounting. The safe measures 13.8 x 9.8 x 9.8 in and weighs 18.3 lb, which suits a garage or closet slab install. Confirm the hole diameter against the supplied bolt when the safe arrives.

How do the SentrySafe 1160 and Amazon Basics 25EI compare for a first install?

The SentrySafe 1160 and Amazon Basics 25EI target similar buyers but split on lock and fire rating. The 1160 is a key-lock chest safe at 16 lb with UL classification for 1/2 hour at 1550°F. The 25EI is a keypad-lock cabinet safe at 18.3 lb with four expansion bolts included but no fire endurance figures. Choose the 1160 for fire, the 25EI for keypad convenience and included bolts.

What is the biggest mistake people make buying a safe for concrete?

The biggest mistake people make is buying on capacity alone and finding out the listing does not specify concrete-relevant hardware. A 5.0 cu. ft. body with no expansion bolts in the box means a second hardware trip and a guess at anchor sizing. Check the listing for expansion bolts, itemised mounting holes, or an in-slab body design before you buy. Weight matters too: heavier safes resist pry attack better once bolted.

Bolt-down installs are less about the safe and more about the slab underneath it, so the pick that fits your floor beats the pick that fits your wishlist. If the job is a small surface anchor with real fire endurance figures on record, the SentrySafe 1160 is the default answer, and the 16 lb body and UL classification are what make it that. Measure the slab thickness, choose an anchor to suit, and drill. If the install is a genuine in-ground pour or a shallow retrofit cavity, step to the Stealth B2500E or the Viking VS-15FL. Every other pick here is a good cabinet safe that happens to accept concrete anchors, which is a different job and a different decision.

Last updated: September 26, 2026. Product availability re-checked.

This page contains affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.